RD965
Highlights
Slim-line and Portable
The device measures a mere 52mm high and weighs less than 5kg, including the 10 Ah battery
Location Services
The GPS module enables emergency control rooms to monitor the location of a small radio network in real time if the repeater is being used as a mobile unit
User-friendly Control Panel
With indicators for the channel status, a button for channel settings and a connection for a hand microphone or a remote speaker microphone (optional) to use the repeater as a base station
Ideal for Monitoring
The device supports voice input and output simultaneously in digital mode which enables users to continuously record conversations if required, for example, in emergency situations
Outdoor Operation
IP67 rating for ingress protection ensures that the rugged RD965 remains dust and waterproof even in harsh conditions
Functions
IP Site Connect
Create and control your network using IP (internet protocol) site connect.
Digital Encryption
40 bit enhanced encryption as standard with the latest firmware, ensuring your transmissions are always secure.
Back Pack
Innovative, rugged backpack designed specifically for outdoor, mobile operation carried on the person
Accessory Connector
Port to connect a multitude of audio accessory options, improving the user operating experience in different environments.
GPS
Enabling location based services via a separate antenna to improve safety and control.
Mixed Mode Operation
This feature allows the device to automatically detect and switch between analogue and digital modes based on the signal received.
Pseudo Trunking
Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to repeater.
Accessories for RD965
Included as standard with RD965
Antenna
Other
Carrying
Cables
Audio
Battery
Charger & Power
Related products that work with the RD965
Technical Specifications
General
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz UHF3: 350-400MHz
- Channel Capacity
- 16
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- DC +13.6v ± 15%
- Battery Backup
- 10Ah Li-Ion (8h at 50-50 duty cycle at 10W TX)
- Integral Battery Charging
- NO
- Dimensions(W×H×D)
- 301 x 184 x 51(mm)
- Weight
- < 3Kg
- Display
- NO
- Programmable Buttons
- 0
- TX Aerial Connector
- PL259 socket
- RX Aerial Connector
- SMA socket
- Internal Duplexer
- YES using optional mounting kit
Environmental Specifications
- Dust & Water Intrusion
- IP67 Standard
Features
- 19" Rack Mounting
- NO
- Wall Mounting
- NO
- Multiple CTCSS/ CDCSS
- YES
- Repeater Knockdown
- YES (Analogue & Digital)
- IP Ports
- 1
- Telemetry
- YES
- Audio Output for Slot A & B
- YES
- Remote Programming
- YES via IP interface
- Remote Diagnostic & Control
- Software available
- Emergency Mode
- NO
- Lone Worker
- NO
- Mandown
- NO
- Priority Scan
- YES
- Digital Encryption
- Advanced encryption (Hytera or DMRA 128 bits and 256bits AES) available via chargeable licence file.
- Multiple Key Encryption Decode
- YES
- Multilanguage Menu
- NO
- Power on & off user logo programming
- NO
- Voice Interrupt
- Yes (latest firmware required and Smart Dispatch V4.5.6 or later)
- Text Messaging
- Yes via application software
- Quick Text Messages
- Up to 25 pre-programmed via CPS (for telemetry use)
- MPT1327 / 1343 Trunking
- NO
- Tier 3 Trunking
- NO
- Single Site XPT
- NO
- Multi-Site XPT
- NO
- Number of Sites
- NO
- Over-the-Air Programming
- NO
- Analogue Only Version
- Not Available