AP525LF

Handheld | Analogue

Highlights

diagram indicating highlights of AP525LF

Independent Volume Keys

Extends the life of the volume knob and can keep the volume settings unchanged after restarting

Aesthetic Design

For ease of use

Anti-Slip and Durable Texture

Anti-abrasive housing for better handling

PTT Key

Push-to-talk key easily accessible

Type-C USB port

Allows to charge the radio with a power bank anywhere

High Reliability

The AP525LF is IP66-graded water-proof and dust-proof and meets stringent MIL-STD-810G military requirements for protection against vibration, 1.5-meter drops, extreme temperature, etc

Functions

Created with Sketch. Hear and be heard anywhere

You might lose key information due to the unclear audio mixed with heavy background noise, or spend much extra time delivering your information to your partners. The AP525LF has a 3W speaker and advanced noise cancellation algorithm to eliminate unwanted background noise, reduce distortion, and suppress howling caused by other devices when in close proximity of each other, delivering louder and clearer audio. The background noise will no longer slow down your communication, and you can hear and be heard wherever you are.

StayConnected-0x20 Communicate Throughout the Workplace

The AP525LF has a high-sensitivity receiving module and high-efficiency monopole antenna to enhance signal penetration and achieve better call effect even in weak signal rooms. In addition, the monopole antenna has a unique stable design and is not easy to break and bend, it helps enhance the life time of the antenna and also increase the radiation efficiency compared to traditional antenna by 11% to extend radio communication distance.

Created with Sketch. Do More While Carrying Less

With a 4000mAh Li-polymer battery, plus the low consumption design, the AP525LF has an incredibly long 25-hour battery life in its most minimal form to supply your increasing needs, without compromising in style or performance. The 10W USB Type-C charger can get the radio fully charged in 1.8-hours, or charge the radio in just one hour to get 8-hour of talk time. The long life battery also helps your teams power through extended shifts. So you can do more, while carrying less.

Created with Sketch. TRUSTWORTHY QUALITY

Hytera has the world's largest professional communication production line, and manufactures each device in accordance with Industry 4.0 standards. Strict supplier management system certification, each component meets the quality control requirements to ensure the consistency of product quality.

Accessories for AP525LF

Included as standard with AP525LF Included as standard with AP525LF

Carrying

Charger & Power

Audio

Cables

Battery

Related products that work with the AP525LF

Technical Specifications

General

Frequency Range
446.0 - 446.2 MHz
Supported operating modes
Analogue PMR446
Channels & zones
Channel capacity: 32
Zone capacity: 2
Channels per zone: 16
Channel Spacing
12.5 kHz
Operating Voltage
3.7 V (rated)
Battery
4000 mAh / 3.7 V
Battery Life (5/5/90 Duty Cycle, High TX Power)
25h
Frequency Stability
±0.5ppm
Antenna Impedance
50Ω
Dimensions (H x W x D)
105 x 55 x 29.5mm
Weight (with antenna & battery)
200g

Receiver

Sensitivity
0.18μV (12dB SINAD)
Adjacent Channel Selectivity
TIA-603: 60dB@12.5kHz
ETSI: 60dB@12.5kHz
Intermodulation
TIA-603: 70dB@12.5kHz
ETSI: 65dB@12.5kHz
Spurious Response Rejection
TIA-603: 70dB@12.5kHz
ETSI: 70dB@12.5kHz
Blocking
TIA-603: 80dB; ETSI: 84dB
Hum and Noise
40dB@12.5kHz
Rated Audio Power Output
0.5W
Rated Audio Distortion
≤3%
Audio Response
+1~-3dB
Conducted Spurious Emission
<-57dBm

Transmitter

RF Power Output
UHF: 0.5W
FM Modulation
-36dBm<1GHz; -30dBm>1GHz
Modulation Limiting
±2.5kHz@12.5kHz
FM Hum & Noise
40dB@12.5kHz
Adjacent Channel Power
60dB@12.5kHz
Audio Response
+1 to -3dB
Audio Distortion
≤3%

Environmental

Operating Temperature
-30℃ to +60℃
(-30℃* Radio only - Battery -20℃)
Storage Temperature
-40℃ to +85℃
ESD
IEC 61000-4-2 (Level 4)
±8kV (contact); ±15kV (air)
Dust and Water Intrusion
IEC 60529 IP66
Humidity
MIL-STD-810 H
Shock and Vibration
MIL-STD-810 H