BP365

Handheld | DMR

Highlights

diagram indicating highlights of BP365

Save frequencies

With digital communication via time slots your employees can simultaneously hold two calls independently of each other.

Fast charging

The built-in battery can be fully charged in just 2.5 hours, and a one-hour charge provides 8 hours of communication.

One port fits all

Users can program, upgrade and charge the BP365 through the same Type-C USB port on the bottom.

0.9 Inch OLED display

Clear and easy to see.

Stay Informed Across the Workplace

Thanks to the 3W TX power and up to 0.18μV receiving sensitivity, the BP36X enables the users to communicate with each other wherever they are in the workspace.

Functions

Created with Sketch. Improved User Experience

Long-life keys | 3.5 mm jack audio connector | USB Type-C port for programming and upgrading.

Created with Sketch. Fast Charging

100% charged in 2.5 hours | Thanks to USB Type C connectivity it can be easily charged with standard USB cables and power supply units and even USB power banks.

StayConnected-0x20 Extended Communication

Stay always connected with brand-new RF solution, 3W TX power and a RX sensitivity up to 0.18 μV

Created with Sketch. EXCELLENT COVERAGE

The BP5 has a high sensitivity receiving module and high efficiency monopole antenna to enhance signal penetration and achieve better call affect even in weak signal areas. In addition, the monopole antenna has a unique thick screw thread design and is not easy to break and bend, it helps to enhance antenna life time and also increase the radiation efficiency compared to traditional antennas by 10% to extend radio communication distance.

Ergo-20x20 Simple and Stylish

Metal channel selector knob | metal mesh speaker | dual-shot injection molding & plating case

Accessories for BP365

Included as standard with BP365 Included as standard with BP365

Related products that work with the BP365

Technical Specifications

General

Frequency range
Ua: 400-440 MHz
Uc: 430-470 MHz
Channels & zones
Channel capacity: 128 digital + 128 analogue
Zone capacity: 8
Channels per zone: 16
Channel spacing
Analogue: 12.5kHz/20kHz/25kHz
Digital: 12.5kHz
Operating voltage
3.8 V
Battery
2200 mAh Li-Polymer (built-in)
Battery life (5/5/90 duty cycle, high TX power)
Analogue: 10 hours
Digital: 14 hours
Frequency stability
±0.5 ppm
Antenna impedance
50 Ω
Dimensions (H x W x D) (mm)
158 x 55 x 25 mm (with antenna)
118 x 55 x 25 mm (device housing without antenna)
Weight (with antenna & battery)
135 g
Display
0.9 inch OLED
Bluetooth
BT 5.0 with BLE+EDR
Digital Protocol
ETSI-TS102 361-1,-2,-3

Receiver

Sensitivity
Analogue: 0.18 μV (12dB SINAD)
Digital: 0.18 μV / BER5%
Adjacent channel selectivity
TIA-603: 60 dB @12.5 kHz / 70 dB @20/25 kHz
ETSI: 60 dB @12.5 kHz / 70 dB @20/25 kHz
Intermodulation
TIA-603: 70 dB
ETSI: 65 dB
Spurious response rejection
TIA-603: 70 dB
ETSI: 70 dB
Blocking
TIA-603: 80 dB
ETSI: 84 dB
Hum and noise
40 dB @12.5 kHz
43 dB@20 kHz
45 dB@25 kHz
Rated audio power output
0.5 W
Rated audio distortion
<3%
Audio response
+1 to -3dB
Conducted spurious emission
<-57 dBm

Transmitter

RF Power Output
3W / 1W
FM Modulation
11K0F3E @12.5kHz
14K0F3E @20kHz
16K0F3E @25kHz
4FSK digital modulation
12.5 kHz data only: 7K60FXD
12.5 kHz data and voice: 7K60FXW
Conducted/radiated emission
-36dBm @<1GHz
-30dBm @>1GHz
Modulation limiting
±2.5kHz @12.5kHz
±4.0kHz @20kHz
±5.0kHz @25kHz
FM hum & noise
40dB @12.5kHz
43dB @20kHz
45dB @25kHz
Adjacent channel power
60dB @12.5kHz
70dB @20/25kHz
Audio distortion
≤3%
Digital vocoder type
AMBE+2TM

Environmental

Operating temperature
-20°C to +50°C
Storage temperature
-40°C to +85°C
ESD
IEC 61000-4-2 (level 3)
±4 kV (contact)
±8 kV (air)
Ingress protection
none