PD365
Highlights
Clear Communication
Thanks to the latest audio processing technology and in-built speaker, the PD365 offers you outstanding audio quality
Analogue or Digital
Flexible dual mode operation for efficient migration from Analogue to Digital comms
Convenient Charging
via the Micro USB Port, or the optional wireless charger and battery casing
Excellent Coverage
Thanks to the unique intergrated antenna
Long Battery Life
Operating time of approximately 12 hours in digital mode
Functions
Wireless Charging
With the optional wireless charging kit and battery case, place the PD365 in the wireless charger holder and it will charge without the need for cables to the radio.
Mixed Mode Operation
This feature allows the radio to automatically detect and switch between analogue and digital modes based on the signal received.
Radio Check
Allows other radio users to check if a radio is available.
Stun / Unstun
You can disable/enable the radio remotely, ideal if a device is lost, stolen or being misused.
RRS
Radio Register Service, allowing a dispatching application to see when a radio is switched on or switched off.
Roaming
This feature allows the radio to switch between sites on multi-site conventional systems, ensuring seamless communication.
Emergency Mode
Raise an alarm with top priority to a base station or to other radios with the pre-programmed emergency mode, identifying the ID of the person issuing the alarm.
Quick Text Messages
Pre-programmed via the Customer Programming Software and stored in the quick text menu ready to send to contacts.
Accessories for PD365
Included as standard with PD365
Charger & Power
Carrying
Audio
Cables
Battery
Other
Related products that work with the PD365
Technical Specifications
General
- Frequency range
- UHF: 430-470MHz
- Channels & zones
- Channel capacity: 256
- Zone capacity: 16
- Channels per zone: 16
- Channel spacing
- Analogue: 12.5kHz/25kHz
- Digital: 12.5kHz
- Operating voltage
- 3.7 V
- Battery
- 2000 mAh (Li-ion)
- Battery life (5-5-90 duty cycle)
- Analogue: 10 hours
- Digital: 14 hours
- Frequency stability
- ±0.5 ppm
- Dimensions (W×H×D)
- 106 x 54 x 23mm
- Weight
- Approx 160g
- Display
- 3 line monochrome LCD
Receiver
- Sensitivity
- Analogue: 0.22 μV (12dB SINAD)
- Analogue: 0.22µV (12dB SINAD) (typical)
- Digital: 0.22 μV / BER5%
- Adjacent channel selectivity
- TIA-603: 60 dB @12.5 kHz / 70 dB @25 kHz
- ETSI: 60 dB @12.5 kHz / 70 dB @25 kHz
- Intermodulation
- TIA-603: 70 dB
- ETSI: 65 dB
- Spurious response rejection
- TIA-603: 70 dB
- ETSI: 70 dB
- Hum and noise
- 40 dB @12.5 kHz
- 45 dB@25 kHz
- Rated audio power output
- 0.4 W
- Rated audio distortion
- <5%
- Audio response
- +1 to -3dB
- Conducted spurious emission
- <-57 dBm
Transmitter
- RF power output
- UHF: 3 W / 1.5 W
- FM modulation
- 11 K0F3E @12.5kHz
- 16K0F3E @25kHz
- 4FSK digital modulation
- 12.5 kHz data only: 7K60FXD
- 12.5 kHz data and voice: 7K60FXW
- Conducted/radiated emission
- -36dBm @<1GHz; -30dBm @>1GHz
- Modulation limiting
- ±2.5kHz @12.5kHz; ±5.0kHz @25kHz
- FM hum & noise
- 40dB @12.5kHz; 43dB @20kHz; 45dB @25kHz
- Adjacent channel power
- 60dB @12.5kHz; 70dB @20/25kHz
- Audio distortion
- ≤3%
- Digital vocoder type
- AMBE+2™
- Digital vocoder type
- ETSI-TS102 361-1,-2,-3
Environmental
- Operating temperature
- -30°C to +60°C (radio only / battery: -20 ℃)
- Storage temperature
- -40°C to +85°C
- ESD
- IEC 61000-4-2 (level 4)
- ±8 kV (contact)
- ±15 kV (air)
- Ingress protection
- IP54
- Humidity
- per MIL-STD-810 G
- Shock and vibration
- per MIL-STD-810 G
Features
- GPS
- NO
- Telemetry
- NO
- Option Board
- NO
- Intrinsically Safe Option
- NO
- Bluetooth Audio
- NO
- Alert Call
- YES (decode only) (requires latest firmware)
- Stun/Unstun
- YES (Decode only) (large MCU only, firmware upgrade & chargeable licence key)
- Remote Monitor
- YES (decode only) (requires latest hardware, firmware & chargeable licence key)
- Priority Interrupt
- YES (Decode only) (large MCU only, firmware upgrade & chargeable licence key) New hardware with FW 5.0 does not support it.
- IP Site Connect
- NO
- Work Order
- YES (large MCU only, requires firmware upgrade)
- 5 Tone Signalling
- NO
- 2 Tone Signalling
- NO
- HDC1200 Signalling
- NO
- DTMF (Phone Patch)
- NO
- Intelligent audio
- YES
- VOX
- YES
- Priority Scan
- YES
- GPS SMS
- NO
- Vibration
- NO
- Lone Worker
- NO
- Mandown
- NO
- Scrambler (Analogue)
- YES (requires latest firmware)
- Roaming
- YES (large MCU only, firmware upgrade & licence key)
- Digital Encryption
- Basic Encryption YES (requires latest hardware, firmware & chargeable licence key)Advanced encryption NO
- Multiple Key Encryption Decode
- NO
- Multilanguage Menu
- YES
- Pesudo Trunking in DMO and RMO
- YES (requires latest firmware & chargeable licence key)
- Power on & off user logo programming
- NO
- Voice Interrupt
- YES (large MCU only) (TX interrupt for Voice Call, Emergency Call, All Call, text message)
- No of Contacts (Conventional)
- Digital 64 Analogue 2-Tone N/A Analogue HDC1200 N/A Analogue 5-Tone N/A
- Text Messaging
- 64 characters (via Quick Text only)
- MPT1327 / 1343 Trunking
- NO
- Tier 3 Trunking
- NO
- XPT
- NO
- Over-the-Air Programming
- NO
- Analogue Only Version
- Not Available
- Wireless Charging
- YES (requires optional wireless charge kit and latest hardware)
- RFID Reader
- NO
- Data Services via Bluetooth
- N/A