HR1065
Based on rich industry experience, customer feedback and technological evolution, Hytera has launched the next generation of digital repeater. The HR1065 has a smaller form factor, enhanced performance, remote management tools and enhanced functionality. It also provides a cost-effective solution to communication networks. Pair with other H Series devices to maximise next generation DMR communication. Click here to view the full H Series Range.
Highlights
Channel Display
Display the channel number.
Power Input
Internal AC power supply with DC battery back-up allows operation during power failures (with trickle charging of lead batteries).
Ethernet
Ethernet port provides access to IP networks, allowing the HR106X to connect to other repeaters and application software for voice dispatching, AVL and messaging.
Antenna
Improved receiver sensitivity gives enhanced coverage and clearer audio compared to older products.
Functions
Ultra-thin Modular
The 1U height of the HR106X series makes it compact, thus reducing space requirements for installation.
Outstanding Performance
Enhanced version with additional co-processor provides increased processing speed to increase data processing.
Cost-effective network construction
The enhanced version of HR106X can support integrated router and SIP gateway functionality, requiring fewer devices and simplified management and offering a cost-effective solution.
Convenient Management
In the enhanced version a web-based repeater management platform has designed to simplify repeater management. Configuration, upgrade and real-time diagnosis can all be completed through a web browser, which is ideal for remote management.
Accessories for HR1065
Included as standard with HR1065
Cables
Audio
Related products that work with the HR1065
Technical Specifications
General
- Frequency range
- UHF: 400-470 MHz
- VHF: 136-174 MHz
- Channels & zones
- Channel capacity: 1024
- Zone capacity: 1
- Channels per zone: 64
- Channel spacing
- Analogue: 12.5kHz/20kHz/25kHz
- Digital: 12.5kHz
- Supply voltage
- DC +13.6 V ± 15% AC 100-240 V
- Current consumption (DC)
- standby DC: ≤0.9 A / AC: ≤0.35 A
- transmitting DC: ≤12 A / AC: ≤1.2 A
- Frequency stability
- ±0.5 ppm
- Antenna impedance
- 50 Ω
- Duty cycle
- 100%
- Dimensions H x W x D
- 44 mm x 483 x 366 mm
- Weight
- 5.8 kg
- Ethernet port
- 1 x RJ45 Ethernet port (standard version)
- 2 x RJ45 Ethernet port (enhanced version)
- USB port
- 1 x USB port (enhanced version)
- Networking
- Single-site repeater mode, IP Multi-site mode
- Digital protocol
- ETSI-TS102 361-1,-2,-3
Receiver
- Sensitivity
- Analogue: 0.18µV (12dB SINAD)
- Analogue: 0.16µV (12dB SINAD) (typical)
- Digital: 0.18µV / BER 5%
- Adjacent channel selectivity
- TIA-603: 65dB @12.5kHz / 75dB @20/25kHz
- ETSI: 60 dB @12.5kHz / 70dB @20/25kHz
- Intermodulation
- TIA-603: 75 dB
- ETSI: 70 dB
- Spurious response rejection
- TIA-603: 80 dB
- ETSI: 80 dB
- Blocking
- 90 dB
- Hum and noise
- 40 dB @12.5kHz
- 43 dB @20kHz
- 45 dB @25kHz
- Conducted spurious emission
- @≤1GHz: ≤ -57 dBm
- @>1GHz: ≤ -47 dBm
- Rated audio distortion
- <3%
- Audio response
- +1 to -3 dB
Transmiter
- RF power output
- 5-50 W
- FM modulation
- 11K0F3E @12.5kHz
- 14K0F3E @20kHz
- 16K0F3E @25kHz
- 4FSK digital modulation
- 12.5kHz data only: 7K60FXD
- 12.5kHz data and voice: 7K60FXW
- Conducted/radiated emission
- operating: -36dBm @<1GHz; -30dBm @>1GHz
- standby: -57dBm @<1GHz, -47dBm @>1GHz
- Modulation limiting
- ±2.5kHz @12.5kHz; ±4.0kHz @20kHz; ±5.0kHz @25kHz
- FM hum and noise
- 40dB @12.5kHz; 43dB @20kHz; 45dB @25kHz
- Adjacent channel power
- 60dB @12.5kHz; 70dB @20/25kHz
- Audio response
- +1 to -3 dB
- Audio distortion
- <3%
- Digital vocoder type
- AMBE+2™
Environmental
- Operating temperature
- -30°C to +60°C
- Storage temperature
- -40°C to +85°C